Confirm the complete PIR9400A3A1AW part number and series from the product label.
Product imageRepresentative image. Confirm the exact label and configuration in the quotation.
Industrial productPart number: PIR9400A3A1AW
DET-TRONICS PIR9400A3A1AW Infrared Gas Detector for Safety
- Part number
- PIR9400A3A1AW
- Availability
- In stock
- Category
- Sensors, Switches & Measurement
- Subcategory
- Sensor Accessories
✓ Part-number review✓ Condition stated in quote✓ Worldwide delivery options
Product overview
PIR9400A3A1AW product information
DET-TRONICS Infrared Gas Detector PIR9400A3A1AW for Hazar…
Reliable early warning for combustible gas leaks in hazardous environments, ensuring safety and compliance.
| Brand | Det-Tronics |
| Model | PIR9400A3A1AW |
| Voltage | 24V DC |
| Country of Origin | United States |
| Weight | 2.5 kg |
| Dimensions | 15.2 x 12.7 x 10.2 cm |
| Warranty | 2 years limited |
| Certifications | ATEX, IECEx, SIL 2, FM |
| SKU / MPN | PIR9400A3A1AW |
| What’s in the box | Infrared gas detector, mounting bracket, terminal connectors, instruction manual |
| Detection Principle | Non-dispersive infrared (NDIR) |
| Gas Range | 0-100% LEL (Lower Explosive Limit) |
| Response Time | < 5 seconds (T90) |
| Operating Temperature | -40°C to +75°C |
| Output Signal | 4-20 mA, HART, RS-485 |
| Ingress Protection | IP66/67 |
Key benefits: Fast response time for immediate hazard detection
SIL 2 certified for high-risk applications
Immune to poisoning from silicone or H2S
Low maintenance with long-life sensor
Easy integration with existing control systems
Typical applications: Oil and gas refineries, chemical plants, offshore platforms, LNG terminals, wastewater treatment
Order number: DET-TRONICS Infrared Gas Detector PIR9400A3A1AW for Hazar…
Lifecycle: Active
Compatibility01 02 03 04
Confirm the complete system—not only the model number
Industrial components can differ by series, firmware, voltage, network, terminal base, memory, accessories and approvals. A matching front label does not by itself guarantee a drop-in replacement.
Send the existing system or application information when compatibility matters.
State quantity, preferred condition, destination and required delivery date.
Include a clear nameplate photo when the revision is uncertain.
Supply condition
Know what is being quoted
The offered condition and inspection scope should be written into the quotation. Do not assume every source uses condition terms in the same way.
New product
Ask whether the unit is factory sealed, open-box or unused surplus, and confirm packaging when relevant.
Unused surplus
Confirm packaging, storage evidence, label condition and included accessories.
Refurbished product
Confirm the refurbishment source, functional test scope, cosmetic condition and warranty.
Used product
Request clear photographs and available inspection or functional-test information.
Documents & support
Technical references
Manufacturer documentation should be used for engineering, installation, safety and certification decisions. This page supports identification and sourcing; it does not replace the manufacturer manual.
Related Sensors, Switches & Measurement products
Browse category products →
Industrial productNA2-N16P+NA2-N16DNew In Box SUNX NA2-N16 (NA2-N16P+NA2-N16D) Ultra-Slim Thrubeam Area Sensor
Industrial productMR-8CNew In Box TOSOKU MR8 MR8C MR-8C 5-pin Switch Logic Output for Pulse Generator
Industrial productSN03R12-502-MNew In Box EUCHNER SN03R12-502-M Travel Switch
Industrial product20251106-1685UVZ 780 Satronic 220v Flame Detector Industrial Combustion Safety SensorProduct questions
Common product questions
Find answers about product identification, compatibility, condition options and quotation requirements.
How can I identify the correct product?
Check the complete part number, series, revision and product label before requesting a quotation.
How should compatibility be confirmed?
Compare the electrical specifications, communication requirements, accessories and existing system documentation.
Which condition options are available?
Products may be offered as new, surplus, refurbished or used. The quotation will state the supplied condition.
What information is needed for a quotation?
Provide the part number, quantity, preferred condition, destination and required delivery date.
Need PIR9400A3A1AW?
Request a QuoteSend the part number and receive a clear quotation.
Include quantity, acceptable condition, destination and timing. A label photo helps verify the request.