Confirm the complete Z2C part number and series from the product label.
Product imageRepresentative image. Confirm the exact label and configuration in the quotation.
Industrial productPart number: Z2C
Original Japan Z2C Fusion Splicer Connector Optic Fiber Splicer Splicing for Single Cord Fiber Cable Core Alignment
- Part number
- Z2C
- Availability
- In stock
- Category
- Electrical Control & Protection
- Subcategory
- Electrical Control Accessories
✓ Part-number review✓ Condition stated in quote✓ Worldwide delivery options
Product overview
Z2C product information
Model Number:Z2C Type:Fiber fusion splicer Brand Name:Z2C Place of Origin:Japan Use:FTTH Warranty Time:2 years Network:Wi-Fi, 4 G Port:1 Power Source:Dc 12V Connector Type:AC adapter Power – Minimum Receivable:DC 10 ~ 15V Frequency Range:AC 100 ~ 240V, 50/60Hz (ADC-16) Splice loss (typical):SMF: 0.02dB, MMF: 0.01dB, DSF : 0.04dB, NZDSF : 0.04dB, BIF : 0.02dB Return loss (typical):60dB or greater Splice time (typical):6sec(SM G652 Quick Mode), 8sec(Auto Mode) Heating time (typical):15sec (FPS-61-2.6 sleeve, S60mm 0.25) Applicable protection sleeve:60mm, 40mm & Sumitomo Nano sleeves Splice programs:Max. 300, 40 are pre-optimsed, 260 editable by user Heating programs:Max. 100, 23 are pre-optimsed, 77 editable by user Reversible coating clamps:Provided Onboard user training video:Provided Automatic fiber identification:SMF / MMF / Other
[custom_product_info]
Compatibility01 02 03 04
Confirm the complete system—not only the model number
Industrial components can differ by series, firmware, voltage, network, terminal base, memory, accessories and approvals. A matching front label does not by itself guarantee a drop-in replacement.
Send the existing system or application information when compatibility matters.
State quantity, preferred condition, destination and required delivery date.
Include a clear nameplate photo when the revision is uncertain.
Supply condition
Know what is being quoted
The offered condition and inspection scope should be written into the quotation. Do not assume every source uses condition terms in the same way.
New product
Ask whether the unit is factory sealed, open-box or unused surplus, and confirm packaging when relevant.
Unused surplus
Confirm packaging, storage evidence, label condition and included accessories.
Refurbished product
Confirm the refurbishment source, functional test scope, cosmetic condition and warranty.
Used product
Request clear photographs and available inspection or functional-test information.
Documents & support
Technical references
Manufacturer documentation should be used for engineering, installation, safety and certification decisions. This page supports identification and sourcing; it does not replace the manufacturer manual.
Related Electrical Control & Protection products
Browse category products →
Industrial product31074-400-44NEW Square D 31074-400-44 Magnet Coil Size 3
Industrial productVW3A66206Telemecanique Square D VW3A66206 Control Keypad Interface Drive Replacement Part Opens in a new window or tab
Industrial productEDB341001 NEW SQUARE D FACTORY SEALED 3P 100A BOLT ON 480/277 - NF PANELBOARDS EDB34100
Opens in a new window or tab
Industrial productSVX030A1-4G1B1Used & Tested EATON SVX030A1-4G1B1 PX0061411B SVX9000 Frequency DriveProduct questions
Common product questions
Find answers about product identification, compatibility, condition options and quotation requirements.
How can I identify the correct product?
Check the complete part number, series, revision and product label before requesting a quotation.
How should compatibility be confirmed?
Compare the electrical specifications, communication requirements, accessories and existing system documentation.
Which condition options are available?
Products may be offered as new, surplus, refurbished or used. The quotation will state the supplied condition.
What information is needed for a quotation?
Provide the part number, quantity, preferred condition, destination and required delivery date.
Need Z2C?
Request a QuoteSend the part number and receive a clear quotation.
Include quantity, acceptable condition, destination and timing. A label photo helps verify the request.