Confirm the complete N2792A part number and series from the product label.
Product imageRepresentative image. Confirm the exact label and configuration in the quotation.
Industrial productAgilent KeysightPart number: N2792A
Agilent Keysight N2792A Differential Probe 200 MHz
- Part number
- N2792A
- Availability
- In stock
- Category
- Test, Inspection & Maintenance
- Subcategory
- Test & Measurement Instruments
✓ Part-number review✓ Condition stated in quote✓ Worldwide delivery options
Product overview
N2792A product information
Agilent Keysight N2792A
A high-bandwidth differential probe for accurately measuring floating and high-speed signals while improving oscilloscope measurement safety and signal integrity.
| Brand | Agilent Keysight |
| Model | N2792A |
| Voltage | ±20 V differential; up to 700 V common-mode |
| Country of Origin | Malaysia |
| Weight | Approximately 0.45 kg |
| Dimensions | Approximately 170 x 40 x 25 mm |
| Warranty | 6 months |
| Certifications | CE, UKCA, RoHS |
| SKU / MPN | N2792A |
| What’s in the box | N2792A differential probe, oscilloscope connection cable, probe accessories, user documentation |
| Bandwidth | 200 MHz |
| Attenuation Ratio | 10:1 |
| Input Impedance | 4 MΩ differential |
| Differential Input Range | ±20 V |
| Common-Mode Voltage | Up to 700 V |
| Oscilloscope Compatibility | Keysight InfiniiVision and Infiniium oscilloscopes with compatible probe interface |
Key benefits: 200 MHz bandwidth, high common-mode rejection, differential measurement capability, reduced ground-loop risk, broad Keysight oscilloscope compatibility
Typical applications: Power electronics debugging, motor drive analysis, switch-mode power supply testing, inverter measurements, industrial control signal verification
Lifecycle: Active product with ongoing manufacturer support
Compatibility01 02 03 04
Confirm the complete system—not only the model number
Industrial components can differ by series, firmware, voltage, network, terminal base, memory, accessories and approvals. A matching front label does not by itself guarantee a drop-in replacement.
Send the existing system or application information when compatibility matters.
State quantity, preferred condition, destination and required delivery date.
Include a clear nameplate photo when the revision is uncertain.
Supply condition
Know what is being quoted
The offered condition and inspection scope should be written into the quotation. Do not assume every source uses condition terms in the same way.
New product
Ask whether the unit is factory sealed, open-box or unused surplus, and confirm packaging when relevant.
Unused surplus
Confirm packaging, storage evidence, label condition and included accessories.
Refurbished product
Confirm the refurbishment source, functional test scope, cosmetic condition and warranty.
Used product
Request clear photographs and available inspection or functional-test information.
Documents & support
Technical references
Manufacturer documentation should be used for engineering, installation, safety and certification decisions. This page supports identification and sourcing; it does not replace the manufacturer manual.
Related Test, Inspection & Maintenance products
Browse category products →
Industrial productN9938BFor Agilent Keysight N9938B FieldFox Handheld Analyzer LCD Screen Display panel
Industrial productF319Clamp-on Multimeter Ammeter F319 FLUKE
Industrial productJ6014C1/2 Drive 50 250 Micrometer Torque Wrench J6014C Proto In Size To
Industrial productPROD024282National Instruments Cdaq9178 8 Compactdaq Chassis Cdaq-9178 Slot USBProduct questions
Common product questions
Find answers about product identification, compatibility, condition options and quotation requirements.
How can I identify the correct product?
Check the complete part number, series, revision and product label before requesting a quotation.
How should compatibility be confirmed?
Compare the electrical specifications, communication requirements, accessories and existing system documentation.
Which condition options are available?
Products may be offered as new, surplus, refurbished or used. The quotation will state the supplied condition.
What information is needed for a quotation?
Provide the part number, quantity, preferred condition, destination and required delivery date.
Need N2792A?
Request a QuoteSend the part number and receive a clear quotation.
Include quantity, acceptable condition, destination and timing. A label photo helps verify the request.