Confirm the complete S 230-45HR part number and series from the product label.
Product imageRepresentative image. Confirm the exact label and configuration in the quotation.
Industrial productAEGPart number: S 230-45HR
Thyristor Power Controller AEG S 230-45HR for Heating
- Part number
- S 230-45HR
- Availability
- In stock
- Category
- Power Supplies & Power Distribution
- Subcategory
- Transformers & Power Converters
✓ Part-number review✓ Condition stated in quote✓ Worldwide delivery options
Product overview
S 230-45HR product information
AEG S 230-45HR
Reliable solid-state power regulation for precise control of 230 VAC industrial heating loads up to 45 A.
| Brand | AEG |
| Model | S 230-45HR |
| Voltage | 230 VAC, single-phase |
| Country of Origin | Germany |
| Weight | Approximately 2.5 kg |
| Dimensions | Approximately 150 x 100 x 120 mm |
| Warranty | 6 months |
| Certifications | CE, industrial electrical safety compliant |
| SKU / MPN | S 230-45HR |
| What’s in the box | AEG thyristor power controller, mounting hardware, product documentation |
| Rated Current | 45 A |
| Control Method | Thyristor phase-angle or burst-firing control |
| Load Type | Resistive industrial heating loads |
| Operating Voltage | 230 VAC |
| Cooling | Ventilated heat-sink cooling |
| Mounting | Panel or cabinet mounting |
Key benefits: Fast electronic switching, accurate power adjustment, reduced mechanical wear, quiet operation, and suitability for continuous industrial duty.
Typical applications: Industrial ovens, furnaces, heating elements, plastics machinery, packaging equipment, drying systems, and temperature-controlled process lines.
Lifecycle: Legacy industrial product; availability and replacement suitability should be confirmed with AEG or an authorized distributor.
Compatibility01 02 03 04
Confirm the complete system—not only the model number
Industrial components can differ by series, firmware, voltage, network, terminal base, memory, accessories and approvals. A matching front label does not by itself guarantee a drop-in replacement.
Send the existing system or application information when compatibility matters.
State quantity, preferred condition, destination and required delivery date.
Include a clear nameplate photo when the revision is uncertain.
Supply condition
Know what is being quoted
The offered condition and inspection scope should be written into the quotation. Do not assume every source uses condition terms in the same way.
New product
Ask whether the unit is factory sealed, open-box or unused surplus, and confirm packaging when relevant.
Unused surplus
Confirm packaging, storage evidence, label condition and included accessories.
Refurbished product
Confirm the refurbishment source, functional test scope, cosmetic condition and warranty.
Used product
Request clear photographs and available inspection or functional-test information.
Documents & support
Technical references
Manufacturer documentation should be used for engineering, installation, safety and certification decisions. This page supports identification and sourcing; it does not replace the manufacturer manual.
Related Power Supplies & Power Distribution products
Browse category products →
Industrial productHS1F2ASNEW SOLA HS1F2AS TRANSFORMER 240/480 VAC PRIMARY 120/240 VAC SECONDARY 2 KVA Opens in a new window or tab
Industrial product2VT460-480FFFlex-Core Potential Transformer 2VT460-480FF Pri: 480V Ratio 4:1 60Hz New
Industrial productPS-25Used & Tested FAGOR PS-25 B4 Power Module
Industrial productK915FA3RN-3000WBWT BEIJING K915FA3RN-30.00W High Power Pump LASER DIODE Module 1pcProduct questions
Common product questions
Find answers about product identification, compatibility, condition options and quotation requirements.
How can I identify the correct product?
Check the complete part number, series, revision and product label before requesting a quotation.
How should compatibility be confirmed?
Compare the electrical specifications, communication requirements, accessories and existing system documentation.
Which condition options are available?
Products may be offered as new, surplus, refurbished or used. The quotation will state the supplied condition.
What information is needed for a quotation?
Provide the part number, quantity, preferred condition, destination and required delivery date.
Need S 230-45HR?
Request a QuoteSend the part number and receive a clear quotation.
Include quantity, acceptable condition, destination and timing. A label photo helps verify the request.